A normal 19’’ rack flight case has a depth of 450mm. Rack rails are fixed directly to the inside of the front and rear of the case at approximately 20mm off the front edge, allowing space for optional R0855K rack shelf supports.

Please note: the Standard 19” Rack Flight Case does not include any protective foam or shock suspension. See our Foam Suspended Rack Cases page if you would like a more protective case.

Standard Designs

Our 19” rack cases are available in any unit height from 2 to 24. Cases of unit height 10 and over include swivel castors with 100mm blue resilex wheels (2 braked). These are mounted on 18mm Birch Ply wheelie boards. Castors can be mounted on the rear of the rack case at an extra cost to cover the cost of extra handles (please get in touch)

Top loading (Mixer Rack) cases can be supplied at an extra cost per case (please get in touch). All rack flight cases come supplied with 2 sets of fixings for every unit size (i.e. 12 screws, 12 cup washers and 12 clip nuts for a 6 unit case). Your rack case will come with both front and rear removable doors as standard.

These standard design flight cases are manufactured in compliance with the Air Transport Association ATA-300 regulations and the Electronic Industries Association EIA-310-D standard.

Accessories

Extra fixings for 19’’ rack cases are available if required.

See our Rack Accessories  list for a range of optional extras that can be fitted to your 19” rack case, including panels, drawers, trays and more.

Silk screen printing of an image or company logo is available if required.